How long do brake pads normally last?
How to check your brake pads and brake discs - instructions
CLEAN THE INSIDE OF THE BRAKE CALIPER
Clean with compressed air, which gets rid of all the accumulated brake dust.
Do it outside and remember to wear mask and goggles.
CHECK FOR BRAKE FLUID LEAKS
Check around the pistons in you caliper and check that the brakes are not binding when you rotate the wheel. The wheel should rotate freely.
If there are leaks or the brakes bind, it is time to refurbish the brake calipers with new pistons, seals, sliding pins, boots etc.
ENSURE BRAKE FLUIDS HAVE BEEN REPLACED ACCORDING TO RECOMMEND INTERVALS
Brake fluid absorbs water over time, which can lead to brake fade! If the fluid has not been changed for a long time or you ride aggressively,
it is always better to change the fluid more often than risk crashing due to fading.
CHECK THAT YOUR BRAKE DISCS AND BRAKE PADS ARE NOT WORN OUT
Minimum disc thickness is usually printed or engraved on the brake disc.
If not see your service manual.
If the dics are too worn, we recommend changing the brake pads when you mount new discs. Please contact your local dealer for changing discs and pads.
CHECK THE GROOVE PATTERN OF THE BRAKE PADS
If there are no grooves in the brake pad surface use a vernier caliper to measure the brake pad thickness in multiple spots. The friction material height (above the steel backing plate) should be at least 1,5 mm. If the brake pads are worn below the groove pattern, it is time to have your local dealer change them
WHEN THE BRAKE PADS AND/OR BRAKE DISCS HAVE BEEN REPLACED
Please remember always to pump the brake lever/pedal a few time until you feel contact before you go riding!
We always recommend that you get assistance from an authorised workshop, so you can just
Go ahead and have fun!
Watch video on how to get your brakes ready for spring